Car Mini Diagnostic Scanner ELM327 OBD2 Bluetooth for Car Diagnostics

The ELM327 car scanner is a universal device for conducting car diagnostics, reading or erasing errors through the OBD2 connector and Bluetooth interface.

Advantages of this model:

•  Compact size
•  Version 2.1 - high speed operation!
•  A set of programs as a gift
•  It has a power off button - now you can not remove the car scanner from the OBD2 connector after turning off the car and do not be afraid that it will land the accumulator during parking.

You can use a mobile phone or tablet to control the ELM327 diagnostic scanner (even an old Nokia on Symbian will do). Communication with the device is made via the Bluetooth wireless protocol.
There are a lot of software products freely available on the web with various functionality, interfaces and language support for every taste, for example: hobDrive, TorquePro, ScanMaster, PCMScan, Proscan, VitalScan and many others.

The list of supported cars includes almost all passenger cars with OBDII (obd2) diagnostic connector, released after 1996.

The compact connector of this model of the ELM327 auto scanner allows you to use the device permanently without removing it from the connector, tracking indicators online.

With this you will be able to:

• Read diagnostic error codes;
• Erase errors;
• Clean up errors and turn off the MIL (Check Engine label on the dashboard).
• Display the values of various sensors, including:
  • Engine speed
  • Engine load
  • Coolant temperature
  • The condition of the fuel system
  • The speed of the car
  • Short-term fuel consumption
  • Long-term fuel consumption
  • Absolute air pressure
  • Ignition advance
  • Intake air temperature
  • Mass air consumption
  • Throttle position
  • Lambda probe readings
• Etc...

The ELM327 car scanner recognizes most diagnostic codes and helps car owners figure out the diagnosis themselves. An indispensable thing in any car service center.

ELM327 transmission rate: 9600 or 38400
ELM327 LED Indicators: OBD Tx/Rx, RS232 Tx/Rx, On/Off
ELM327 operating voltage: 12V, internal short circuit/overvoltage protection
Rated standby current: 45 mA
 

Support for OBD II/EOBD protocols:

ISO15765-4 (CAN bus): Audi, Chrysler, Ford, Jaguar, Mazda, Mitsubishi, Opel, Peugeot, Porsche, Renault, Saab, Volvo, VW
ISO14230-4 (KWP2000): Daewoo, Hyundai, KIA
ISO9141-2: Audi, BMW, Honda, Infinity, Lexus, Mercedes, Nissan, Porsche, Toyota
J1850 VPW: Buick, Cadillac, Chevrolet, Chrysler, Dodge, GM, Isuzu
J1850 PWM: Lincoln, Ford, Mazda
 

Set

ELM327 Diagnostic Auto Scanner
The disk with the scanner software

The principle of operation of the ELM327 diagnostic auto scanner

Using the Bluetooth wireless protocol, the diagnostic scanner is able to communicate with your smartphone, tablet, laptop, PC, terminal, PDA and even with some GPS-navigator. You can control the diagnostic scanner on these devices using the programs that come with it, or other software that is publicly available on the Internet.

The ELM327 auto scanner works with both conventional injection engines and direct fuel injection engines, with diesels and gas engines.

Depending on the program you choose and the brand of the car, it is possible to diagnose the ABS, transmission, airbags, climate control and other components of the car.