VICMAX S2 H4 72W 8000Lm LED lamp set

S2 H4 4Drive LED car light bulb kit LED S2 H4 lamps

A real revolution in headlighting for automobiles

Until recently, LEDs did not have enough power to be used in such lighting devices as car headlights and were suitable mainly for local lighting (interior, parking lights, etc.).

Progress does not stand still and with the advent of super bright light-emitting diodes (LEDs), the automotive industry has received a worthy replacement for the classic halogen lamps and an alternative to more expensive, requiring difficulties in installation, xenon lamps.

Advantages of modern LED lamps on ultra-bright LEDs:

• energy efficiency 72 W )
• powerful luminous flux 8000 Lm, similar xenon 2600 Lm, halogen about 1300 Lm
• independent and easy installation| similar to the replacement of standard lamps
• high service life| 30 000 hours against 1000 hours halogen
• no glare like xenon| uniform luminous flux, no "beam"
• full and uniform illumination of the roadway| safety

LED lamps 4Drive - add brightness!

To date, these lamps are considered the most modern and give the maximum effect. They consist of many LEDs, directed along a certain path. In terms of characteristics, their light is close to daylight. The power consumption of LED lamps is the lowest, and the service life is the longest.

Due to the unique design, such lamps have a fairly large angle of illumination, as well as the range of light, which is about 500 meters, which is 300% better than the indicator of halogen analogs. In addition, 4Drive LED lamps are extremely resistant to temperature fluctuations and can operate under any conditions.

Features:

• shine 3 times brighter than conventional halogen bulbs;
• do not flicker and do not irritate the driver;
• qualitatively illuminate the road at night, while not causing eye fatigue, as their light is close to daylight;
• are able to last more than 5 years, which is not the case with halogen lamps;
• do not heat up, as their design provides a cooler for cooling;
• the light is directed to the road and the roadside, and not scattered in space;
• are easily and quickly installed in the standard sockets, do not require additional blocks and adapters;
• do not require adjustment, and therefore do not blind oncoming drivers.

How to use

Instructions for use of LED lamps 4Drive is as follows:

1. Remove the protective cover from the headlight.
2. Remove the standard bulb.
3. Connect the 4Drive bulb.
4. Install it in the headlight.
5. Do the same with the high beam bulb.
6. Insert the LED bulb into the headlamp.
7. Install the protective cover.