MDK MD-86 8GA 5 m set of cables for car amplifier MDK MD-86 8GA 5 m set of cables for car acoustics, subwoofer

The correct operation of an amplifier or subwoofer in a car depends to a large extent on the characteristics and quality of the wires and, of course, the correctness of their connection. Power wires, in this case from the battery, differ in cross-sectional area, which determines the amount of current flowing through the wire.

For this set of wires, the American standard for determining the cross-sectional area AWG is used. As the AWG (GA) index increases, the cross-sectional area decreases. The proposed kit has an index of8GA, and for this kit the wire diameter should be 3.25 mm and the cross-sectional area: 8.3 sq. mm.

Depending on the consumption value, the wire gauge also depends on the consumption value. The length of the wire also plays a role. There are tables of these values. The wire material itself also plays a role. Ready-made wire sets are a good solution for installation and good performance of an active subwoofer. We offer such a kit for MDK MD-8 subwoofer for a sub with built-in amplifier.

The kit contains all the necessary wires and accessories for proper connection of the amplifier in the subwoofer in your car. Reliable and high quality connection cables will allow you to hear the playback without distortion. Wires no thinner than 8GA allow you to connect multiple subwoofer amplifiers to this kit.

Features:

• - 8GA power cable: 5m
• - Power cable: 0.9m
• - RCA cable: 5m
• - Acoustic cable: 7.6m
• - Control cable: 5m
• - AGU bulb with 60A fuse
• - Connection terminals: yes
• - Weight: 655 g
• - Form Factor: 8GA
• - Diameter: 3.25 mm
• - Cross-section: 8.3 mm2
  

Accessories:

1. - 1 power cable
2. - 1 power cable
3. - 1 speaker cable
4. - 1 RCA cable
5. - 1 control cable
6. - AGU bulb with fuse
7. - Connection terminals
8. - Blister box