Ignition button start stop Smart Start System with an immobilizer for cars with backlight, universal system for starting and stopping the car engine

With this button, you can forget about the need to carry ignition keys for cars forever. Set the button to start/stop the engine and evaluate its advantages. It is worth noting that similar buttons are used in most sports cars. At the same time, this system is compatible with any alarms and immobilizers. In addition, such a button can be installed in gasoline and diesel cars of any year.

Advantages:

• The button is equipped with a magnetic keychain, which is used to start and stop the engine.
• To start the engine, remove the lock by attaching the keychain to the immobilizer.
• When you apply the key ring, the button will light up in light blue.
• After that, you can depress the brake pedal and easily press the button. As a result, the car is ready to move. To turn off the engine, follow the same steps.
• If you only want to turn on the ignition mode, then you should press the button without touching the pedals.
• Thanks to the detailed instructions, you can install the button yourself. The kit includes all the necessary wires.
• The stylish design will harmoniously complement the interior of any car.
• The button can be installed anywhere in the car.
• When the car is moving, the button automatically locks, excluding accidental pressing.

How to use the start button:

• Remove the car alarm and get in the car. Depress the brake pedal and press the start button once - the engine will start within 0.5 - 1.5 seconds of starter operation.
• The LED indicator on the button will start to glow.
• To turn off the engine, just as with the brake pedal pressed, press the button once and the engine will stop. After that, the button indicator light will go out.
• Switching between ACC-ON-OFF modes is performed without pressing the brake pedal. 

Features:

• Temperature conditions: -40°-+ 80° Atmospheric pressure 86-106 kPa;
• Relative humidity: 10%-95%;
• Operating voltage: DC12V +/- 3V;
• The operating frequency is 433.92 MHz;
• Backlight color: Blue;
• Alarm compatibility: Yes.

Dimensions for installation:

• The diameter of the metal part of the button is 40 mm.
• The diameter of the rubber pad on the button is 51 mm;
• The length of the wiring from the button to the block is 1100 mm;
• The outer ring diameter of the immobilizer is 88 mm;
• The diameter of the inner ring of the immobilizer is 69 mm;
• The length of the wire from the immobilizer ring to the block is 1100 mm;
• The thickness of the immobilizer ring is 7 mm;
• The length of the power wires to the ignition switch is 500 mm;
• The dimensions of the control unit are 88/88/30 mm;

Package contents:

1. The control unit;
2. The START-STOP button;
3. An immobilizer.
4. Button mounting;
5. Two key chains with the immobilizer code;
6. Two cables for connection;
7. Package.