Integrated Sound Power Amplifier UKC AV-326BT 240W with Bluetooth and Karaoke

Integrated amplifier UKC AV-326BT Bluetooth audio amplifier, two–channel with equalizer, with built-in player, FM tuner and Karaoke. The amplifier player plays files from USB drives, SD memory cards and via Bluetooth. The output power is 50 watts per channel at a 4-ohm load. The amplifier is powered by 220V or 12V mains, controlled by a remote control.

The front panel of the amplifier is slightly overloaded with regulators. On the left side there are 4 6.3 mm jack inputs for the microphone and controls for them – volume, echo, delay, timbre. In the middle are the control buttons and the screen of the built-in player, there are also 2 slots for playing from a USB drive and an SD card. On the right side there is a 5-band graphic equalizer – a separate one for each channel, a button to turn off the equalizer. You can adjust the timbre and balance using the controls on the left side of the amplifier with the EQ button turned off or with the equalizer button turned on.

On the rear panel there are connectors for 2 linear analog inputs and 1 2*RCA output, screw terminals for connecting acoustics, a telescopic antenna, a built-in 220V network cable and clips for connecting from 12V.

Inside, the amplifier is made neatly – the gain boards are separated from the control boards and the player by a cooling radiator, the UKC AV-326BT is powered by a powerful toroidal transformer, the power amplifier is made on transistors. The sound is best reproduced from the audio input line input – the signal from this input goes along a shortened path, immediately to the volume and tone block, bypassing all digital circuits.

The amplifier can play from external analog sources, from USB drives (flash drives, hard drives) from SD memory cards, via Bluetooth, there is an FM radio 87.5-108 MHz. It works in Class B, the sound from the microphone is superimposed on the sound from any source that is being played at this time.

The UKC AV-326BT amplifier is designed to play and increase the volume of music from PCs, MP3, MP4 players, mobile phones and other audio devices using an audio cable.

This amplifier can be used as a speaker for a PC, as well as as a headset on a mobile phone.

Plus, the amplifier has a built-in FM receiver.

Features:

• The simplest, intuitive control;
• Convenient regulators;
• Digital radio receiver: 87 - 108 MHz (auto-scanning of FM radio stations);
• Support for SD/MMC memory cards up to 32 GB;
• High-quality and loud sound;
• Circuit engineering semiconductor
• Karaoke is
• 2-channel output;
• Power: 2 x 120 W;
• Karaoke for 4 microphones and their setup
• The ability to connect to a phone, computer, player, etc.
• Reads memory cards and USB flash drives directly without using additional equipment
• Fine tuning of bass and sound
• It works from both 220 and 12 Volts;
• Case Material: Metal;
• Voltage: AC 220V/DC 12V input;
• Total harmonic distortion: 0.5%;
• Separation between channels: 80 dB.
  
  Interfaces
  Inputs 2 audio input 2*RCA
  Audio output 2*RCA outputs
  Connectors for acoustics screw clips
  Power supply 220V, 12V 5-10A
  
  Parameters:
  Frequency 20 Hz - 20 kHz
  Harmonic coefficient <0.02% (20Hz-20kHz)
  Signal-to-noise ratio >92 dB
  Resistance: 4-8 Ohms;
  Treble tone control 15dB (at 10 kHz)
  Bass tone control 15dB (at 100 Hz)
  Features
  Supported formats MP3, Wave
  Bluetooth    4,0
  5-band graphic equalizer
  FM Radio 87.5-108 MHz
  
  Physical parameters
  Weight 2.6 kg
  Size 290*240*100 mm

Package contents:

• Sound amplifier;
• Remote control;
• Instructions in English;
• Package.