Smoke Detector for Home Alarm JYX SS168

Smoke Detector for Home Alarm JYX SS168

SS-168 Wireless Sensor (TS-168) designed to detect smoke in the room. The detector is triggered by smoke using an infrared emitter and a photodetector. The elements are mounted in a special smoke chamber. When smoke particles enter the camera, the photodetector detects distortion of the infrared beam. If there is a lot of smoke, the beam distortion becomes strong, the sensor sends a message via a radio channel (without wires) about a fire alarm to the central unit and the sound siren built into the sensor turns on.

Specifications:

• Sensor Type: Wireless

• Sensor Type: Photoelectric

• Covered area: 20 sq.m

• Built-in siren volume: 85 dB

• Maximum distance between sensors and the center: 100 meters

• Transmission frequency: 433MHz

• Sensor radio transmitter power: 10 MW

• Sensor radio signal modulation: ASK

• Battery Type: PP3 battery (Crown)

• Sensor life from one battery: up to 1 year

• Operating voltage: 9V

• Idle/alarm current consumption: 5/36 mA

• Operating temperature range: -0°C – +40 °C

• Operating humidity:from 10 to 85 %

• Dimensions : 115 x 35 mm

* The color shade of the product may differ from the one shown in the photo, including it depends on the settings of your computer monitor. The characteristics and configuration of the product are subject to change by the manufacturer without notice.

The store is not responsible for changes made by the manufacturer.